-
Scaffolding pole foundation
(1) The height of the floor-standing scaffolding should not exceed 35m. When the height is between 35 and 50m, unloading measures must be taken. When the height is greater than 50m, unloading measures must be taken and the special plan should be demonstrated by experts. (2) The scaffolding founda...Read more -
Technical comparison of bowl buckle scaffolding, wheel buckle scaffolding, and disc buckle scaffolding
1. Cost Ordinary bowl buckle scaffolding: 100,000 cubic meters of erection and disassembly, low unit cost, high labor cost, and high transportation cost. Wheel buckle scaffolding: 100,000 cubic meters for erection and disassembly, medium material cost, medium labor cost, and medium transportation...Read more -
Scaffolding safety technical specification – construction accessories
1. Scaffolding steel pipe: The scaffold steel pipe should be Φ48.3×3.6 steel pipe (the plan should be calculated according to the actual situation). The maximum mass of each steel pipe should not be greater than 25.8kg. 2. Scaffolding steel plank: The scaffolding board can be made of steel, wood,...Read more -
Scaffolding fasteners erection
(1) New fasteners should have production licenses, product quality certificates,s and inspection reports. The quality inspection of the old fasteners should be carried out before use. Those with cracks and deformation are strictly prohibited to be used. The bolts with slippery threads must be rep...Read more -
Scaffolding FAQ
No. 1 . Design 1. The quality of steel pipes, top supports, bottom supports and fasteners is generally unqualified in domestic scaffolding. In actual construction, theoretical calculations have not taken these into account. It is best to take a certain safety factor in the design and calculation ...Read more -
How to Calculate Scaffolding
(1) When calculating the scaffolding on the inner and outer walls, the area occupied by the openings of doors and windows, the openings of hollow circles, etc. shall not be deducted. (2) When the height of the same building is different, it shall be calculated according to the different heights. ...Read more -
Scaffolding acceptance points
When to accept (1) After the foundation is completed and before the scaffolding is erected; (2) After every 10~13m height is erected; (3) After reaching the design height; (4) Before applying the load on the working layer; (5) After encountering sixth-level strong wind and heavy rain; after freez...Read more -
Matters need attention during the construction of the scaffolding
1) Correct the verticality and horizontal deviation of the rod with the lap, and at the same time properly tighten the fastener. The tightening torque of the fastener bolt should be between 40 and 50N·m, and the maximum cannot exceed 65N·m. The butt fasteners connecting the vertical poles must be...Read more -
Scaffolding construction precautions
As the construction volume continues to increase, the huge scaffolding group is likely to have several safety hazards at the same time, and many accident signs are caused by inadequate reinforcement measures. So what issues should we pay attention to? (1) Foundation settlement will cause local de...Read more