-
Scaffolding Deformation Accidents and Solutions
1. When the scaffold is unloaded or the tensioning system is partially damaged, immediately repair it according to the unloading method formulated in the original plan, and correct the deformed parts and rods. If the deformation of the scaffold is corrected, set up a 5t reverse chain in each bay ...Read more -
How to Identify Scaffolding Accident Signs
Scaffolding collapses vertically (1) The early sign of vertical collapse is that the lower part of the frame and the longer pole begin to show lateral arch deformation, which is visible to the naked eye but easy to ignore. (2) The mid-term sign of vertical collapse is that the vertical poles begi...Read more -
During the use of scaffolding, the following items should be checked regularly
During the use of scaffolding, the following items should be checked regularly: ① Whether the setting and connection of rods, the structure of connecting wall, bracing, door truss, etc. meet the requirements; ②Whether the foundation is waterlogged, whether the base is loose, and whether the pole ...Read more -
Features of the buckle-type scaffolding
1. Multifunctional. According to the construction requirements, construction equipment with multiple functions such as single-row, double-row scaffolding, support frame, support column, etc. with a modulus of 0.5m and other frame sizes and loads can be formed and can be arranged in curves. 2. Les...Read more -
Overhanging scaffolding protection measures
1. A special construction plan should be prepared and approved, and experts should be organized to demonstrate the plan for the construction of more than 20m in sections; 2. The cantilever beam of the cantilevered scaffold must be made of I-beam above 16#, the anchoring end of the cantilever beam...Read more -
The floor-standing scaffolding construction method
The construction of floor-standing scaffolding starts directly from the ground or floor surface. Its bearing capacity is large and the shelf is stable and not easy to loosen and tilt. It can not only be used for structural engineering construction, but also decoration engineering construction; Co...Read more -
When will scaffolding be inspected
1. After the scaffolding foundation is completed before the frame is erected. 2. After every 6-8m height is erected. 3. Before applying load on the working layer. 4. After reaching the design height or encountering winds or heavy rains of level 6 and above, after the frozen area is thawed. 5. Ina...Read more -
The most direct cause of scaffolding accidents at the construction site
The construction site is the most direct cause of scaffolding accidents. It is whether the scaffolding workers have set up and strengthened the scaffolding in place. The first is the erection of scaffolding, whether it conforms to the specifications, sweeping poles, scissor braces, spacing betwee...Read more -
Scaffolding scissor brace setting points
First, the principle of setting the horizontal scissors 【normal type】 ① Set horizontal scissor support at the top; ②When the erection height exceeds 8m or the total construction load is greater than 15KN/㎡ or the concentrated line load is greater than 20KN/m, the top and bottom scissor braces ...Read more