-
Technical requirements for cantilevered scaffolding
Cantilevered scaffolding is a highly dangerous sub-project, with a cantilever height greater than 20 meters. It is a dangerous project exceeding a certain scale, and the cantilever height should not exceed 20 meters. Technical requirements for cantilevered scaffolding: 1. The distance between the...Read more -
FAQ about scaffolding
Design (1) There should be a clear understanding of heavy-duty scaffolding. Generally, if the thickness of the floor slab exceeds 300mm, it should be considered to be designed according to heavy-duty scaffolding. If the scaffolding load exceeds 15KN/㎡, the design plan should organize expert demo...Read more -
How to build aluminum alloy scaffolding
The construction steps of aluminum alloy scaffolding are as follows: 1. Preparation: Check whether the scaffolding materials are intact, check whether the working area is flat and stable, and prepare necessary safety equipment and tools. 2. Install the foundation: Excavate the foundation at the f...Read more -
Advantages of cantilevered scaffolding
1. Cantilevered scaffolding has the advantages of local materials, convenient erection, cost saving, safety and reliability, and is currently widely used in high-rise building construction. At the same time, the facade effect of the outer frame is the business card of construction management, and...Read more -
Acceptance of scaffolding
The main points of scaffolding acceptance 1) Whether the setting and connection of the rods, the structure of the wall parts, supports, and door opening trusses meet the requirements. 2) Whether the foundation is waterlogged, whether the base is loose, whether the pole is suspended in the air, an...Read more -
Construction process of cantilevered scaffolding
1. Technical clarification, on-site construction preparation, setting-out positioning measurement; 2. Pre-embedded anchor ring in the cantilever layer; 3. Installation of the supporting system structure at the bottom of the cantilever frame; 4. Erect the pole and fasten the vertical sweeping pole...Read more -
Scaffolding engineering safety production standardization
1. The erection of scaffolding should meet the requirements of the standard specifications. A 200mm wide warning tape should be installed every 3 floors or 10m, fixed on the outside of the pole, and the scissors should be continuously installed. 2. Color: Paint the surface of the steel pipe of th...Read more -
The characteristics of scaffolding
Different types of engineering construction use scaffolding for different purposes. Most of the bridge supports use bowl buckle scaffolding, and some use portal scaffolding. The main structure construction floor scaffolding mostly uses fastener scaffolding. The vertical distance of the scaffoldin...Read more -
Scaffolding
1. Requirements for the erection of support rod type cantilevered scaffolding The erection of the support rod-type cantilevered scaffold needs to control the load, and the erection should be firm. When erecting, the inner shelf should be set up first, so that the cross bar protrudes out of the wa...Read more