1. Quality inspection of disc-type scaffolding. Before entering the construction site, the scaffolding must undergo quality inspection, and the inspection must be qualified and accompanied by a quality inspection report.
2. Select a site and conduct quality inspection on the geology of the site to ensure that the ground is flat, the load-bearing capacity meets the standards, and no collapse will occur. If the geology meets the standards and the ground is flat, an adjustable base can be placed. Adjust with the adjustable base.
3. Construction personnel, the erection and dismantling of the disc-type scaffolding must be performed by trained professional scaffolders who are certified; non-special workers are not allowed to engage in erection operations. Scaffolders must wear safety helmets and fasten safety belts correctly when entering the construction site. Each operator on the scaffold must be equipped with non-slip gloves, non-slip shoes, and safety hooks or bags for things, and the work things must be hung on the safety hooks or put in the bags.
4. When erecting the frame, erect the first-floor vertical poles, horizontal poles, and vertical diagonal poles, lay the platform steel springboards as required, set the step distance reasonably, and erect according to the pre-approved construction requirements. Use it in accordance with the standard after safety acceptance according to the use requirements.
Post time: Apr-27-2025