1. The horizontal protective frame is calculated in square meters according to the actual horizontal projected area of the decking.
2. The vertical protective frame is calculated in square meters based on the erection height between the natural floor and the top horizontal bar, multiplied by the actual tower design length.
3. Overhead transportation scaffolding is calculated based on the tower’s length in extended meters.
4. For chimney and water tower scaffolding, the height of different towers is calculated regarding seats.
5. Elevator shaft scaffolding is calculated based on the number of seats per hole.
6. The ramps have different heights and are calculated based on seats.
7. The masonry silo scaffolding, regardless of a single tube or silo group, shall be calculated in square meters based on the perimeter of the outer edge of the single tube multiplied by the designed height between the outdoor floor and the upper entrance of the silo.
8. Scaffolding for water (oil) storage pools shall be calculated in square meters based on the perimeter of the outer wall multiplied by the height between the outdoor floor and the top surface of the pool wall.
9. Large equipment foundation scaffolding is calculated in square meters based on the perimeter of its shape multiplied by the height from the floor to the top edge of the shape.
10. The vertical closure engineering quantity of a building is calculated based on the vertical projected area of the closure surface.
Post time: Dec-08-2023