Disk-type scaffolding is widely used in general viaducts and other bridge projects, tunnel projects, factories, elevated water towers, power plants, refineries, etc., as well as the support design of special factories. It is also suitable for overpasses, span scaffolds, storage shelves, chimneys, water towers, and indoor buildings. Internal and external decoration, large-scale concert stages, background stands, stands, viewing stands, modeling stands, stair systems, party stage settings, sports competition stands, and other projects.
Advantages of buckle-type scaffolding:
1. The buckle-type scaffolding adopts a hot-dip galvanizing process, which can give the scaffolding a strong adhesion ability, thus giving the scaffolding a longer service life.
2. The cost of buckle-type scaffolding is lower than most other scaffolding, and other more cost-effective than other types of scaffolding. This eliminates the need to worry about potential security risks and costs.
3. The buckle-type scaffolding also has the advantages of high-temperature resistance, no burning, and high bearing capacity. During the construction process, any possible safety accidents can be avoided, ensuring smooth system channels and reliable safety guarantees.
4. The buckle-type scaffolding is more stressed than other types of scaffolding. Under normal circumstances, the buckle-type scaffolding can withstand a load of 200KN. This can effectively save steel consumption.
5. Compared with traditional scaffolding, the spare parts of buckle-type scaffolding are not easy to lose, and the amount of steel is much less than that of traditional scaffolding, so it can greatly reduce economic losses and reduce construction costs.
6. The disassembly and assembly of the buckle-type scaffolding is very simple. One person can easily install and disassemble it with a hammer, which greatly improves construction efficiency.
The buckle-type scaffolding is mainly used for lighting stands and background stands for large-scale concerts. The plate-buckle scaffolding is an upgraded product after the bowl-buckle scaffolding. It mainly uses a novel and beautiful disc to connect the crossbar, with a connecting sleeve at the bottom. The crossbar is made by welding plugs with pins on both ends of the steel pipe. When installing, you only need to align the crossbar joint with the position of the chrysanthemum disk, insert the latch into the chrysanthemum disk hole and through the bottom of the joint with your hand, and then tap the top of the latch with a hammer to make the arc surface on the crossbar joint and the vertical pole Tightly combined. At present, it seems that the use of buckle-type scaffolding has become more and more common. It has outstanding advantages, is easy to build and beautiful, and is unanimously welcomed by everyone.
Post time: May-10-2024